ROLL-IN WARMERS
90° TO 180° RANGE
WARMERS
EXTENDED HEIGHT
(72" CART CAPACITY)
Standard Features
• Modern, State-of-the-Art Styling
• Top Mounted Heating Plenum “Plug” Design with
Circulating Fans for Uniform Temperature
Distribution
• Humidity Relief Vent
3
1
• 27 /8" Wide, 72 /2" High Door Openings
• 3" Non-CFC Polyurethane Foam Insulation
• Cam-Action Lift-Off Hinges
• Self-Closing Doors
• Automatic Interior Lighting
DL1WI-SS-E
• Cylinder Lock In Each Door
• Exterior Thermostat Control with master
On/Off Control Switch
DL3WI-SS-E
• Removable Stainless Steel Ramps
• Magnetic Snap-In Door Gasket
• Exterior Digital Thermometer
• Removable Stainless Steel Rack Guides
DL2WI-SS-E
Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)
Models Available
•Consult Factory
Heating System-(Range 90°F to 180°F)
Cabinet Construction
Door Construction
Electrically operated heating system is con-
trolled by means of a highly sensitive calibrat-
ed thermostat mounted on the cabinet front.
Fin strip heating elements are located at the
base of the interior. Air circulating blower
located in a top mounted, concealed “plug”
housing distributes heat throughout product
zone, assuring uniform cabinet temperatures.
Cabinet top has a built-in humidity relief vent.
The entire “plug” system is mounted on a stur-
dy steel, rail-type base which can be easily
removed if refrigerator or freezer conversion is
desired. A strict quality assurance team
inspects all material and components to certi-
fy that each model conforms to the most
exacting standards. All models are factory
performance tested for a minimum of 16 hours
prior to crating.
All materials are of top quality, assembled to
conform with strict quality-assurance require-
ments. The cabinet front and doors are con-
structed of heavy-gauge polished stainless
steel for durability. All cabinet joints and
seams are sealed vapor-tight. Case is of all
metal, welded construction and internally sup-
ported and braced for a rigid unit construction.
Cabinet design eliminates overlapping panels
with raw edges. Cabinet body and doors are
insulated with non-CFC, foamed-in-place
polyurethane foam with an average thickness
of 3 inches to ensure increased energy effi-
ciency. Automatic interior lighting is controlled
by door openings. Cabinets are equipped with
an easily removable, stainless steel ramp and
interior rack guides.
Door shells are constructed of heavy-gauge
stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door cor-
ners are of welded construction and polished.
Door gaskets are self-adjusting, heavy-duty,
magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are
provided with built-in cylinder locks which are
keyed alike. Hinges are cam action, lift-off
type featuring positive safety stop at 120
degrees.
|
Curtis Flat Panel Television LCDVD2234A User Manual
Dacor Beverage Dispenser Wine Steward Beverage Cooler User Manual
Dixon Lawn Mower ZTR 308 311 User Manual
Dynex CRT Television DX R24TV User Manual
Field Controls Oxygen Equipment FC95HRV User Manual
Garland Fryer C836 1 35F User Manual
GE TV Cables JGSP48SH User Manual
GE Ventilation Hood JV655 User Manual
GE Ventilation Hood PVB37 User Manual
Global Machinery Company Drill 18VDT18V User Manual